4
Measurement Operations & Settings
NOTE
96
Setting parameters for the logging function sets some parameters, including
hidden parameters, for the stability and MinMax functions and vice versa. You
must use the
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:LOGGing
page 97 command to set parameters before you start a logging function using
the
:SENSe[n][:CHANnel[m]]:FUNCtion:STATe
on page 104 command.
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
on