response:
none
example:
OUTP1:POW:OFFS:POW 4,4
affects:
Attenuator modules with power control.
command:
:OUTPutn[:CHANnel[m]]:POWer:CONTRol
syntax:
:OUTPutn[:CHANnel[m]]:POWer:CONTRol<wsp>OFF(0) | ON(1)
description:
Sets whether the power control mode is on or off.
If power control is enabled, the attenuator automatically compensates for changes to
input power.
parameters:
OFF or 0
ON or 1
response:
none
example:
OUTP1:POW:CONTR ON
affects:
Attenuator modules with power control.
command:
:OUTPutn[:CHANnel[m]]:POWer:CONTRol?
syntax:
:OUTPutn[:CHANnel[m]]:POWer:CONTRol?
description:
Queries whether the power control mode is on or off.
parameters:
none
response:
boolean
example:
OUTP1:POW:CONTR?
affects:
Attenuator modules with power control.
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
Output power follows changes to input power.
The filter position automatically adjusts to compensate for changes to input power, so maintaining the
output power set by the user.
0 The power control mode is off
1 The power control mode is on.
->
0<END>
Measurement Operations & Settings
4
191