Keysight Technologies 8163A/B Programming Manual page 131

command: [:SOURce[n]][:CHANnel[m]]:FM:SBSCtrl:FREQuency[l]
syntax: [:SOURce[n]][:CHANnel[m]]:FM:SBSCtrl:FREQuency[l]<wsp><frequency>
[MHZ|KHZ|HZ|MIN|MAX|DEF]
description: Sets the frequency of the SBS Control modulation.
Enable frequency modulation before issuing this command.
Refer to
[:SOURce[n]][:CHANnel[m]]:FM:STATe[l]
parameters: The modulation frequency as a float value.
The default units are HZ, although KHZ, MHZ, GHZ and THZ can also be specified.
Also allowed are:
response: none
example: sour2:fm:sbsc:freq 4000Hz
affects: Keysight 81960A, 81980A, 81940A, 81989A, 81949A compact tunable lasers.
command: [:SOURce[n]][:CHANnel[m]]:FM:SBSCtrl:FREQuency[l]?
syntax: [:SOURce[n]][:CHANnel[m]]:FM:SBSCtrl:FREQuency[l]?<wsp>[MIN|MAX|DEF]
description: Queries the currently set frequency of the SBS Control modulation.
parameters: Optional
response: The modulation frequency in Hz as a float value
example: sour2:fm:freq?
affects: Keysight 81960A, 81980A, 81940A, 81989A, 81949A compact tunable lasers.
command: [:SOURce[n]][:CHANnel[m]]:FM:SBSCtrl:LEVel[l]
syntax: [:SOURce[n]][:CHANnel[m]]:FM:SBSCtrl:LEVel[l]<wsp>[MIN|MAX|DEF]
description: Sets the excursion of the SBS Control frequency modulation to a percentage of its maximum value.
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
[:SOURce[n]][:CHANnel[m]]:FM:SOURce[l]
MIN: minimum programmable value
MAX: maximum programmable value
DEF: default preset (*RST) value.
MIN: returns the minimum programmable value
MAX: returns the maximum programmable value
DEF: returns the default preset (*RST) value.
->
+4.00000E+03<END>
Measurement Operations & Settings
on page 129 and
on page 130.
4
131