Table of Contents
Advertisement
command:
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:MINMax?
syntax:
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:MINMax?
description:
Returns the MinMax mode and the number of data points for the MinMax data acquisition function.
parameters:
none
response:
CONT:
WIND:
REFR:
The number of data points is returned as an integer value.
example:
sens1:func:par:minm?
affects:
All power meters and return loss modules
dual sensors:
Can only be sent to master channel, slave channel parameters are identical.
NOTE
command:
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:STABility
syntax:
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:STABility<wsp>
<total time>[NS|US|MS|S],<period time>[NS|US|MS|S],<averaging time>[NS|US|MS|S]
description:
Sets the total time, period time, and averaging time for the stability data acquisition function.
parameters:
Total time:
Period time:
Averaging time:
Measurement Running
Measurement Stopped
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
->
WIND,+10<END>
Setting parameters for the stability function sets some parameters, including
hidden parameters, for the logging and MinMax functions and vice versa. You
must use the
:SENSe[n][:CHANnel[m]]:FUNCtion:PARameter:STABility
command to set parameters before you start a stability function using the
:SENSe[n][:CHANnel[m]]:FUNCtion:STATe
The total time from the start of stability mode until it is completed.
A new measurement is started after the completion of every period time.
A measurement is averaged over the averaging time.
Averaging Time
1
2
Measurement Operations & Settings
continuous MinMax mode
window MinMax mode
refresh MinMax mode
on page 104 command.
Period Time
3
4
4
on page 99
5
t
99
Advertisement
Table of Contents
