Keysight Technologies 8163A/B Programming Manual page 201

command:
syntax:
CAUTION
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
:CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:VALue:DELete:ALL
:CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:VALue:DELete:ALL
This command clears the offset table!
Deletes every value pair (wavelength:offset) from the offset table.
none
none
CONF1:OFFS:WAV:VAL:DEL:ALL
All attenuator modules.
:CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:TABle?
:CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:TABle?
Queries the complete the offset table.
none
SCPI binary block format format (Intel byte order); wavelength:offset pairs in ascending
order.
Each value pair is transferred as 12 bytes; 8 bytes represent the wavelength, 4 bytes represent the offset.
->
CONF1:OFFS:WAV:TAB? binary block interpreted as, for example:
1.55e-6 | 12 | 1.7e-6 |3.4 |.....
All attenuator modules.
:CONFigure[n][:CHANnel[m]]:OFFSet:WAVelength:TABle:SIZE?
:CONFigure[n]][:CHANnel[m]]:OFFSet:WAVelength:TABle:SIZE?<wsp>MAX | MIN
Without optional parameter, queries the size of the offset table.
MAX Queries the maximum size of the offset table.
(available flash memory
MIN Queries the minimum size of the offset table. (should
Measurement Operations & Settings
->
1000 entries)
->
0)
4
201