Keysight Technologies 8163A/B Programming Manual page 193

command: :OUTPutn[:CHANnel[m]]:POWer:UNit?
syntax: :OUTPutn[:CHANnel[m]]:POWer:UNit?
description: Queries whether the power unit is dBm or W
parameters: none
response: boolean
example: OUTP1:POW:UN?
affects: All attenuator modules, and 81950A.
command: :OUTPutn[:CHANnel[m]]:[STATe]
syntax: :OUTPutn[:CHANnel[m]]:[STATe]<wsp>OFF(0) | ON(1)
description: Sets the state of the shutter.
parameters: OFF or 0
ON or 1
response: none
example: OUTP1:STAT OFF
affects: All attenuator modules, and 81950A.
command: :OUTPutn[:CHANnel[m]]:[STATe]?
syntax: :OUTPutn[:CHANnel[m]]:[STATe]?
description: Queries the state of the shutter.
parameters: none
response: boolean
example: OUTP1:STAT?
affects: All attenuator modules, and 81950A.
command: :OUTPutn[:CHANnel[m]]:STATe:APOWeron
syntax: :OUTPutn[:CHANnel[m]]:STATe:APOWeron<wsp>OFF(0) | ON(1)
description: Sets the state of the shutter when the mainframe is turned on.
8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
0 The power unit is dBm
1 The power unit is W.
->
0<END>
Shutter closed.
Shutter open.
0 The shutter is closed.
1 The shutter is open.
->
0<END>
Measurement Operations & Settings 4
193