Cleaning The Print Heads - Pitney Bowes Connect+ Series Operator's Manual

6. Check the test pattern.
If the solid lines of the test pattern are unbroken, select Image is OK - Done. Skip to step 7.
l
If the test pattern has missing or incomplete lines, select Not OK - Clean print head. Once
l
the cleaning operation completes, you will be prompted to print another test pattern. If the
pattern still has broken or missing lines, you may need to replace the ink cartridge or print
head.
7. Select Done to return to the Home screen.

Cleaning the print heads

You can clean the print heads at any time to ensure optimal print quality.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select Hardware.
3. Select Printer.
4. Select the Print head tab.
5. Select the Clean button. Print head cleaning takes approximately one minute. A progress bar
indicates the cleaning status.
6. Once the cleaning process is complete, you will be prompted to
Pitney Bowes Connect+ Series Operator Guide April, 2016
print a test pattern.
Maintenance
Page 327 of 367