Pitney Bowes Connect+ Series Operator's Manual page 24

The attached scale is behind the supplies cover and to the right of the PSD cover.
Moistener Pad Assembly
The moistener pad assembly moistens the flaps on the envelope.
NOTE: The moistener pad assembly is located beneath the moistener deck on Connect+ 3000 systems.
To access it, lift the top release lever and then use the blue notch to pull on and open the moistener deck.
Connect+® 500W, Connect+ 1000 and Connect+ 2000 Systems
Connect+ 3000 Systems
Thickness Adjustment Knob
The thickness adjustment knob is located beneath the feeder cover. Turn this knob to adjust for the
thickness of the envelopes.
Pitney Bowes Connect+ Series Operator Guide April, 2016
Getting started
Page 24 of 367