Pitney Bowes Connect+ Series Operator's Manual page 107

3. As with graphic markers, the text markers are left justified or right justified. The markers define the
locations for return addresses or other text messages.
4. The methods for choosing a text message or a return address are the same as for graphic images.
Refer to Adding a
5. To create a new message, refer to
Creating a new message or return address
1. Select anywhere within the envelope on the Run Mail screen. You can also select the Edit
envelope link.
2. Select the Text message & Return address option from the list box on the left of the Edit
envelope screen.
3. Select the New link directly under the Text message list box. Type in the message in the dialog
box. If you use the on-screen keyboard to type in the text, select Close and then Save when
complete.
Note:
The number of characters per line depends on the size of the font (see step 5). For Arial 10 point,
the limit is 100 characters per line.
4. Type in the name of the Text message when prompted and then select OK.
5. To edit the text message, select Manage.
Pitney Bowes Connect+ Series Operator Guide
graphic.
Creating a new message or return
April, 2016
Running mail
address.
Page 107 of 367