Pitney Bowes Connect+ Series Operator's Manual page 292

System Setup
3. Select IntelliLink. The
data center URL for the system are displayed. These fields are automatically populated by Pitney
Bowes.
If necessary, select a field, type in the parameter and select OK.
l
Note:
Changes to the IntelliLink® parameters may result in errors when connecting to Pitney Bowes.
If necessary, select the Reset to Factory Settings button to revert to the default values for
l
these fields.
4. Select Done to return to the Home screen.
Viewing and exporting communication settings
This option allows you to view the communication settings for your system and export them to a USB
drive. The communication settings are viewed within the Settings application.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select Internet & Network from the list on the left side of the screen.
3. Select Communication Settings. The IP address, Synchronous port, Asynchronous port, Host
name, Machine ID, and Machine password for the system are displayed. These fields are
automatically populated by Pitney Bowes.
If it is necessary for you to export the communications settings, insert a USB drive into an available
on the mailing system.
The communication settings are typically exported to set up the SendSuite Xpress™ and Ascent™
interface with the Connect+ Series system.
Pitney Bowes Connect+ Series Operator Guide
Postage by Phone postage account
April, 2016
number, Distributor URL, and Backup
port
Page 292 of 367