Running A Manual Weight Entry Job - Pitney Bowes Connect+ Series Operator's Manual

Running a Manual Weight Entry job

When you need to use a scale that is not connected to your system, you can still use the system to
calculate the postage for you.
1. Select the Run Mail button from the Home screen.
2. Select a job that uses Manual weight entry.
3. Place the mail piece on the detached scale and note its weight.
4. Select the Weighing icon.
a. Ensure the Manual weight entry option is selected.
b. If necessary, change the weighing units.
c. Type in the mail piece weight.
d. Select OK to go back to the Run Mail screen.
5. Select the class of service.
6. Put the mail on the feed deck.
7. Select Start, or if printing to tape, select Tape.
Pitney Bowes Connect+ Series Operator Guide April, 2016
Running mail
Page 75 of 367