Pitney Bowes Connect+ Series Operator's Manual page 325

Maintenance
4. Use the blue notch to pull on and open the moistener deck.
5. Use two fingers to remove the wick.
6. Clean the wick by holding it under running water.
7. Slide the wick back into place. Gently press down on the wick to ensure it is seated properly.
8. Push the moistener deck back into place.
9. Push down on the top release lever until it snaps into place.
10. Close the feed cover and select OK.
Pitney Bowes Connect+ Series Operator Guide April, 2016 Page 325 of 367