Setting The System Clock - Pitney Bowes Connect+ Series Operator's Manual

System Setup
Enabling or disabling the postal information upload warning and setting
the threshold
If your Connect+ Series system has a good network connection, it will attempt to upload postal
information automatically when the screen saver is displayed, when you shut down the system down and
when you enter Manage Accounts. Postal information can also be uploaded manually through the Funds
application and in the Run Mail application after running tracking services or through the postal
information upload warning.
The postal information upload warning
threshold. This warning is enabled by default on your system.
If you have a slow network connection and uploads are taking too long, lower the threshold. The
l
upload warning will appear more frequently.
If you have a fast network connection and uploads are going quickly, you can raise the threshold if
l
you feel the warnings are appearing too frequently. This will allow the system to create more files
before the warning appears.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Postal Information Upload.
4. Select the Enable Postal Upload Warning check box.
A check mark indicates that the warning is enabled.
l
If the check box is empty the warning is disabled.
l
5. Select and drag the control button along the slide bar to adjust the threshold. Use the + and -
buttons for a more precise selection.
6. Select OK to save your changes.

Setting the system clock

1. Select the Settings button in the Mailing tile on the Home screen.
2. Select System from the list on the left side of the screen.
Pitney Bowes Connect+ Series Operator Guide
will appear when the postal information files reach a specific
April, 2016 Page 296 of 367