Replacing The Ink Pad In The Waste Ink Tray - Pitney Bowes Connect+ Series Operator's Manual

a. Select the Pattern number: field.
b. Type in the number of the best aligned pattern.
c. Select OK.
d. Select Next to continue.
2. Repeat step 1 to print the second vertical test pattern.
3. If the alignment was successful, a message appears indicating that the print heads have been
vertically aligned to print on tape. Select Next to continue to the horizontal alignment.
4. Select Tape to print the first horizontal test pattern.
a. Select the Pattern number: field.
b. Type in the number of the best aligned pattern.
c. Select OK.
d. Select Next to continue.
5. Repeat step 4 to print the second horizontal test pattern.
6. If the alignment was successful, a message appears indicating that the print heads have been
aligned to print on tape. Select Done.

Replacing the ink pad in the waste ink tray

Ink is deposited in the waste ink tray during the print head cleaning process. The system will alert you
when the ink pad in the waste tray is nearing full capacity. Once the ink pad is full, you will not be able to
process mail until the pad has been replaced.
1. Select the Settings button in the Mailing tile on the Home screen.
2. The Settings screen displays. Select Hardware.
3. Select Printer.
4. Select the Waste Ink Tray tab.
5. Remove the ink pad, tray and rubber gloves from the packaging. Be sure to wear the rubber
gloves to prevent ink from transferring to your hands.
Pitney Bowes Connect+ Series Operator Guide April, 2016
Maintenance
Page 341 of 367