Pitney Bowes Connect+ Series Operator's Manual page 306

System Setup
Reset IntelliLink Factory Settings
l
Withdraw a meter
l
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Users.
4. Select the Roles setup tab.
5. Select the Operator user role.
6. Select the functions in the Allow access to: list that you want users to be able to perform.
A check box with a check mark indicates that all operators will have access to the function.
l
An empty check box indicates that all operators will not have access to the function.
l
7. Select the Home button to return to the Home screen.
Editing a user
Note:
Supervisor access rights are required to manage users.
Follow the steps below to edit a user on your system.
1. Select the Settings button in the Mailing tile on the Home screen.
2. Select System from the list on the left side of the screen.
3. Select Users.
4. Select a user to edit. If necessary, use the up and down arrow buttons to navigate through the list.
5. Select Edit.
Pitney Bowes Connect+ Series Operator Guide April, 2016 Page 306 of 367