Replacing The Ink Cartridges - Pitney Bowes Connect+ Series Operator's Manual

Maintenance
Note:
If spot black (#2) printing is turned off, you can continue to print mail for 14 days. When the period expires
you will need to reactivate spot black (#2) printing by installing a new ink cartridge. If you do not install a
new ink cartridge spot black (#2) printing will be disabled permanently.

Replacing the ink cartridges

Replace the ink cartridges once you receive the low ink or out of ink warning.
Warning:
Use Pitney Bowes ink cartridges to ensure best printer performance. Other ink cartridges
may cause: poor print quality, rejected/returned mail and uncovered service expenses.
The ink in the cartridge may be harmful if swallowed. Keep new and used cartridges out of reach of
children. Discard empty cartridges immediately.
Do not remove the ink cartridge if the print head is not installed. If the ink cartridge and print head are
removed at the same time, ink from the print supply line will flow down the tube and squirt from the needle
in the ink cartridge holder out into the printer and system interior.
1. You can replace the ink cartridges by selecting Replace ink cartridge when the low ink or out of
ink warning appears. You can also replace the ink cartridges at any time by:
a. Selecting the Settings button in the Mailing tile on the Home screen.
b. Select Hardware, then select Printer.
c. Select the Ink cartridges tab.
d. Select Replace ink cartridge.
Pitney Bowes Connect+ Series Operator Guide April, 2016 Page 330 of 367