Danfoss VLT Refrigeration Drive FC 103 Programming Manual page 17

Hide thumbs Also See for VLT Refrigeration Drive FC 103:
Table of Contents

Advertisement

How to Program
On
Warn.
Alarm
Illustration 2.6 Indicator Lights
GLCP keys
Menu keys
The menu keys are divided into functions. The keys below
the display and indicator lights are used for parameter set-
up, including selection of display indication during normal
operation.
Quick
Status
Menu
Illustration 2.7 Menu Keys
[Status]
[Status] indicates the status of the frequency converter
and/or the motor.
3 different readouts can be selected by pressing the
[Status] key:
5-line readouts.
4-line readouts.
Smart logic control.
Press [Status] to select the display mode or for changing
back to Display mode from either Quick Menu mode, Main
Menu mode, or Alarm mode. Also press [Status] to toggle
between single or double readout mode.
[Quick Menu]
[Quick Menu] allows quick set-up of the frequency
converter. The most common functions can be
programmed here.
The Quick Menu consists of:
My personal menu.
Quick set-up.
Function set-up.
Changes made.
Loggings.
The Function Set-up provides quick and easy access to all
parameters required for most applications including:
MG16H202
Programming Guide
Main
Alarm
Menu
Log
Danfoss A/S © 05/2016 All rights reserved.
Most VAV and CAV supply and return fans.
Cooling tower fans.
Primary, secondary, and condenser water pumps.
Other pump, fan, and compressor applications.
Among other features, it also includes parameters for
selecting which variables to display in the LCP:
Digital preset speeds.
Scaling of analog references.
Closed-loop single-zone and multi-zone
applications.
Specific functions related to fans, pumps, and
compressors.
The Quick Menu parameters can be accessed immediately
unless a password has been created via:
Parameter 0-60 Main Menu Password.
Parameter 0-61 Access to Main Menu w/o Password.
Parameter 0-65 Personal Menu Password.
Parameter 0-66 Access to Personal Menu w/o
Password.
It is possible to switch directly between Quick Menu mode
and Main Menu mode.
[Main Menu]
Press [Main Menu] to program all parameters. The main
menu parameters can be accessed immediately unless a
password has been created via:
Parameter 0-60 Main Menu Password.
Parameter 0-61 Access to Main Menu w/o Password.
Parameter 0-65 Personal Menu Password.
Parameter 0-66 Access to Personal Menu w/o
Password.
For most applications, it is not necessary to access the
main menu parameters. Instead, the Quick Menu, Quick Set-
up and Function Set-up provide the simplest and quickest
access to the most required parameters.
It is possible to switch directly between Main Menu mode
and Quick Menu mode.
Parameter shortcut can be carried out by pressing [Main
Menu] for 3 s. The parameter shortcut allows direct access
to any parameter.
[Alarm Log]
[Alarm Log] displays an alarm list of the 10 most recent
alarms (numbered A1-A10). To obtain more details about
an alarm, press the navigation keys to manoeuvre to the
alarm number and press [OK]. Information is shown about
the condition of the frequency converter before it enters
the alarm mode.
The [Alarm Log] key on the LCP allows access to both
alarm log and maintenance log.
2
2
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VLT Refrigeration Drive FC 103 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents