Danfoss VLT Refrigeration Drive FC 103 Programming Manual page 95

Parameter Description
8-91 Bus Jog 2 Speed
Range:
Size related [ 0 - par. 4-13
*
RPM]
8-94 Bus Feedback 1
Range: Function:
0 [-200 - Write feedback to this parameter via the serial
*
200] communication port or fieldbus option. This
parameter must be selected in
parameter 20-00 Feedback 1 Source,
parameter 20-03 Feedback 2 Source, or
parameter 20-06 Feedback 3 Source as a feedback
source.
8-95 Bus Feedback 2
Range: Function:
0 [-200 - 200] See parameter 8-94 Bus Feedback 1 for further
*
details.
8-96 Bus Feedback 3
Range: Function:
0 [-200 - 200] See parameter 8-94 Bus Feedback 1 for further
*
details.
MG16H202
Programming Guide
Function:
Enter the jog speed. Activate this
fixed jog speed via the serial port
or fieldbus option.
Danfoss A/S © 05/2016 All rights reserved.
3 3
93