Danfoss VLT Refrigeration Drive FC 103 Programming Manual page 36

Parameter Description
3.2.6 0-6* Password
0-60 Main Menu Password
Range:
100 [-9999 -
*
3 3
9999]
0-61 Access to Main Menu w/o Password
Option:
[0] Full access
*
[1] LCP: Read only Prevents unauthorized editing of Main
[2] LCP: No access Prevents unauthorized viewing and editing
[3] Bus: Read only
[4] Bus: No access
[5] All: Read only
[6] All: No access
0-65 Personal Menu Password
Range:
200 [-9999 -
*
9999]
0-66 Access to Personal Menu w/o Password
If parameter 0-61 Access to Main Menu w/o Password is set to [0]
Full access, this parameter is ignored.
Option:
[0] Full access
*
[1] LCP: Read only
[2] LCP: No access
[3] Bus: Read only
[4] Bus: No access
[5] All: Read only
[6] All: No access
34
VLT
Function:
Define the password for access to the Main
Menu via the [Main Menu] key. If
parameter 0-61 Access to Main Menu w/o
Password is set to [0] Full access, this parameter
is ignored.
Function:
Disables the password defined in
parameter 0-60 Main Menu Password. If this
option is selected, parameter 0-60 Main
Menu Password, parameter 0-65 Personal
Menu Password, and parameter 0-66 Access
to Personal Menu w/o Password are ignored.
Menu parameters.
of Main Menu parameters.
Function:
Define the password for access to My Personal
Menu via the [Quick Menu] key. If
parameter 0-66 Access to Personal Menu w/o
Password is set to [0] Full access, this parameter
is ignored.
Function:
Disables the password defined in
parameter 0-65 Personal Menu Password.
Prevents unauthorized editing of My
Personal Menu-parameters.
Prevents unauthorized viewing and
editing of My Personal Menu-parameters.
Danfoss A/S © 05/2016 All rights reserved.
®
Refrigeration Drive FC 103
0-67 Bus Password Access
Range:
0 [0 - 9999] Use this parameter to unlock the frequency
*
3.2.7 0-7* Clock Settings
Set the time and date of the internal clock. The internal
clock can be used for timed actions, energy log, trend
analysis, date/time stamps on alarms, logged data,
preventive maintenance, and so on.
It is possible to program the clock for daylight saving time/
summertime, weekly working days/non-working days
including 20 exceptions (holidays, and so on). Although the
clock settings can be set via the LCP, they can also be set
along with timed actions and preventative maintenance
functions using the MCT 10 Set-up Software tool.
NOTICE
The frequency converter has no back-up of the clock
function and the set date/time resets to default
(2000-01-01 00:00) after a power-down unless a real-time
clock-module with back-up is installed. If no module with
back-up is installed, only use the clock function if the
frequency converter is integrated into the BMS using
serial communications, with the BMS maintaining
synchronization of control equipment clock times. In
parameter 0-79 Clock Fault, it is possible to program for a
warning if the clock has not been set properly, for
example after a power down.
NOTICE
If mounting VLT
back-up of the date and time is included.
0-70 Set Date and Time
Range:
Size related
*
0-71 Date Format
Option:
[0] YYYY-MM-DD
[1] DD-MM-YYYY
[2] MM/DD/YYYY
Function:
converter via fieldbus or MCT 10 Set-up Software.
®
Analog I/O Option MCB 109, a battery
Function:
[ 0 - 0] Sets the date and time of the internal
clock. The format to be used is set in
parameter 0-71 Date Format and
parameter 0-72 Time Format.
Function:
Sets the date format to be used in the LCP.
MG16H202