Danfoss VLT Refrigeration Drive FC 103 Programming Manual page 119

Parameter Description
15-63 Option Serial No
Array [8]
Range: Function:
0 [0 - 18] View the installed option serial number.
*
15-70 Option in Slot A
Range: Function:
0 [0 - 30] View the type code string for the option installed
*
in slot A, and a translation of the type code string.
For example, type code string AX means no option.
15-71 Slot A Option SW Version
Range: Function:
0 [0 - 20] View the software version for the option installed
*
in slot A.
15-72 Option in Slot B
Range: Function:
0 [0 - 30] View the type code string for the option installed
*
in slot B, and a translation of the type code string.
For example, for type code string BX, the
translation is No option.
15-73 Slot B Option SW Version
Range: Function:
0 [0 - 20] View the software version for the option installed
*
in slot B.
15-74 Option in Slot C0/E0
Range: Function:
0 [0 - 30] View the type code string for the option installed
*
in slot C, and a translation of the type code string.
For example, type code string CXXXX means no
option.
15-75 Slot C0/E0 Option SW Version
Range: Function:
0 [0 - 20] View the software version for the option installed
*
in slot C.
15-76 Option in Slot C1/E1
Range: Function:
0 [0 - 30] Shows the typecode string for the options (CXXXX
*
if there is no option).
15-77 Slot C1/E1 Option SW Version
Range: Function:
0 [0 - 20] Software version for the installed option in option
*
slot C.
MG16H202
Programming Guide
15-80 Fan Running Hours
Range:
0 h [0 - 2147483647
*
h]
15-81 Preset Fan Running Hours
Range:
0 h [0 - 99999 h] Enter the preset fan running hours counter,
*
3.13.7 15-9* Parameter Info
15-92 Defined Parameters
Range:
0 [0 - 9999] View a list of all defined parameters in the
*
15-93 Modified Parameters
Range:
0 [0 - 9999] View a list of the parameters that have been
*
15-99 Parameter Metadata
Array [30]
Range:
0 [0 - 9999] This parameter contains data used by the MCT
*
Danfoss A/S © 05/2016 All rights reserved.
Function:
View how many hours the heat sink
fan has run (increments for every
hour). The value is saved when the
frequency converter is turned off.
Function:
see parameter 15-80 Fan Running Hours.
This parameter cannot be selected via the
serial port, RS485.
Function:
frequency converter. The list ends with 0.
Function:
changed from their default setting. The list ends
with 0. Changes may not be visible until up to
30 s after implementation.
Function:
10 Set-up Software tool.
3 3
117