Xerox WorkCentre Pro 423 Service Manual page 67

2.3.1.9 Activity Report in User Mode
"Send"
No Doc No. Receiver Start Time
1 0004 Remote ID 1- 1;11:36AM
2 0012 xxsales office 11:36AM
3 0005 ECM 12:07PM
4 0001 xxbranch 12:09PM
5 0013 xxbranch 12:09PM
6 0014 xxbranch 12:09PM
7 0015 xxbranch 12:09PM
8 0016 xxbranch 12:09PM
9 0002 Remote center 12:10PM
10 0003 12:13PM
ECM
11 0011 1- 2; 6:34PM
G3
12 0012 7:00PM
xxbranch Mr. Suzuki
012345 (F Code ex.)
13 0013 7:40PM
G3
"Receive"
No Doc No. Receiver Start Time
1 0100 remote name 1-24; 6:34PM
2 0101 remote name 1-29; 6:34PM
3 0102 remote name 6:50PM
4 0103 ECM 6:50PM
012345 (F Code ex.)
Only one remote office is recorded in the following priority order:
Short dialing
Origination: Remote party name > Remote office name > Remote ID > Tel number > Comm mode
Termination: Remote party name > Remote ID > Communication mode
Full dialing
Origination: Remote office name > Remote ID > Telephone number > Communication mode
Termination: Remote office name > Remote ID > Communication mode
Email
Remote party name> Email address
address
Only one mode is recorded from four kinds (G3, G4, EMC, and SG3).
Communication result
Communication
result
Print or box accumulation is complete after error-free transmission and reception.
Good
Transmission to PESS is complete but arrival at the remote party is not sure.
Send Complete
The redial count has exceeded the limit.
Busy
The call is ended automatically. (The resend count has not exceeded the limit.)
Auto Resend
Printing is not complete after reception, excluding box accumulation.
Wait for Print
Document Deleted The document was received normally but deleted before printing or fetch.
The operator suspended the call from the panel.
Suspended
The operator suspended a print instruction by a box command.
Print Suspended
Communication failed due to an error at the remote party or network.
Check Remote
Party
The resend count has exceeded the limit.
Send Again
An error occurred during reception.
Receive Again
An error code occurred.
KX-XX/VX-XX
The line is not connected.
Check Cable
WorkCentre Pro 423/428
Durat Pages Mode Contents
1'10" 999/999 ECM Multi-poll good
10'15" 1/ 1 ECM Relay broadcast good
10'15" 1/ 10 ECM Polling K7-07
10'15" 1/ 1 ECM Relay broadcast good
10'15" 1/ 1 ECM Mail Box(confidential) Suspend
10'15" 1/ 1 ECM Multi-poll Mail box Delete doc
Delete doc
10'15" 1/ 1 ECM Relay broadcast inst
10'15" 1/ 1 ECM Multi-poll Mail box K6-06
55" 1/ 10 ECM Remote service Suspend
10'15" -/ 10 ECM Mail box Polling good
10'15" 1/ 1 G3 M.B. Relay B. inst good
1'15" 1/ 1 ECM good
19'15" 101/101 ECM good
Durat. Pages Mode Contents
2'05" 9 ECM good
2'05" 90 ECM Confidential good
2'05" 900 ECM K7-01
2'05" 9000 ECM K7-02
Description
2.3.1.10 Activity Report in Diag(C/E) Mode
"Send"
Result
No Doc No. Receiver
1 004 Remote ID
2 012
3 014 Remote center
"Receive"
No Doc No. Receiver
1 0100 remote name
2 0101 remote name
3 0102 remote name
4 0103 remote name
Mode Displays
Result
Type code
20
Outside line 0
21
Extension 0
22
Outside line 1
23
Extension 1
24
Outside line 2
25
Extension 2
28
ISDN0
29
ISDN1
38
For G4M0 communication
39
For G4M1 communication
Normal Combinations of Modes
Combination
20 40(22 41/24 42)
21 40(23 41/25 42)
28 40(28 41/28 42/29 40/29 41/29 42)
38 48(39 4A)
00 80
03/02
2-35
Start Time Durat. (Time Pages
required)
1- 1;11:36AM 1'10" 999/999
G3 7:40PM 10'15" 1/ 10
8:50PM 5'10"
Start Time Durat. Pages
1-24; 6:34PM 2'05" 9
1-29; 6:34PM 2'05" 90
6:50PM 2'05" 900
6:50PM 2'05" 9000
Meaning Type code
40
Communication by G3M0
41
Communication by G3M1
42
Communication by G3M2
48
Communication by G4M0
49
4A Communication by G4M1
4B
-
Meaning
G3 Outside line
G3 Extension
ISDN-G3
ISDN-G4
Communication by Nic card
2.3 Level 2 Troubleshooting
CHAPTER 2 TROUBLESHOOTING
Mode Contents Activity
Result
24 34 Multi-poll 0000-000000
24 34 M.B Relay B.inst FFFE-000000
Remote service 0501
Mode Contents Result
30 38 0000-000000
24 34 Mail Box(confiden.) FFFE-000000
30 38 086D-02001C
24 34 022F-C01
Meaning
-
-