Xerox WorkCentre Pro 423 Service Manual page 425

WorkCentre Pro 423/428
Chart Mode
9600BPS
Image electronic Super fine Within
assoc. NO.4 (600dpi) 70 sec.
Image electronic Super fine Within
assoc. NO.4 (400dpi) 48 sec.
Image electronic Fine Within
assoc. NO.4 resolution 25 sec.
Image electronic Standard Within
assoc. NO.4 18 sec.
ITU-T(old Super fine Within
CCITT)NO.1 (600dpi) 40 sec.
ITU-T(old Super fine Within
CCITT)NO.1 (400dpi) 26 sec.
ITU-T(old CCITT) Fine Within
NO.1 resolution 13 sec.
ITU-T(old CCITT) Standard Within
NO.1 9 sec.
FX English Standard Within
8 sec.
FX Japanese Standard Within
9 sec.
Image electronic Standard Within
assoc. NO.1 (Halftone) 50 sec.
Conditions: ECM (No DATA ERROR), JBIG, On Platen input
* Reference value
10. Protocol control time (Unit: sec.)
l When no data errors occur, Protocol Control Time per phase is as shown in the table
below.
l Definition of individual control time:
Tm: Between the line closure and the time the first message training arrives.
Tn: Between the end of the previous message and the arrival of the next
message training.
Tu: Between the end of the final message and the clearing of the line.
V.17, V29,V27ter
Mode Before
message: Tm message: Tn
Protocol 13.9 to 16.4
V.34/V.8
Mode Before
message: Tm message: Tn
Standard Proto 8.7 to 9.9
Transmission time (Tp)
14.4KBPS 28.8KBPS 33.6KBPS
Within Within Within
48 sec. 25 sec. 23 sec.
Within Within Within
33 sec. 18 sec. 15 sec.*
Within Within Within
17 sec. 10 sec. 9 sec.*
Within Within Within
13 sec. 8 sec. 7 sec.*
Within Within Within
27 sec. 15 sec. 13 sec.
Within Within Within
18 sec. 10 sec. 9 sec.*
Within Within Within
10 sec. 6 sec. 5 sec.*
Within Within Within
7 sec. 4 sec. 4 sec.*
Within < 3 sec. < 3 sec.
6 sec.
Within Within Within
7 sec. 4 sec. 3 sec.*
Within Within Within
20 sec. 10 sec. 10 sec.*
During After message: Total
Tu
3.2 4.4 21.5 to 24.0
During After message: Total
Tu
1.0 0.9 10.6 to 11.8
03/02
6-8
6.1.5 Direct FAX Specification/Functions
Note when Fax and Printer functions installed at the same time
Specifications
Item
Send doc. size A3, B4, A4, B5(LEF), A5(LEF)
Transmission speed G3:
G4(option): 64kbps max
Transmission Time 2 sec*
Resolution Standard:
Fine resolution:
Super fine:
Applicable line Public switched Telephone network (PSTN), PBX, INS
Net
64 (G3/G4 *
MH, MR, MMR, JBIG
Band Compression
method
Client PC98, DOS/V
OS Windows 95/98/Me, Windows NT 4.0, Windows 2000
Note: For Windows XP, we will inform in the near future
*1 When being equipped with ISDN Kit in optional accessories
*2 When an A4 document of about 700 characters is sent in the standard image quality
mode (8x3.85 lines /mm (28.8 kbps or more: JBIG)
Functions
Item
• Full dial:100 digits max
Fax number
• F Code, P Code (each max: 20 digits)
• Speed Dial (Number that is programmed in WCP main unit)
• Available signs (apart from numbers 0-9) are as follows:
"-" Pause (not available in ISDN)
"S" Specify Password
"<", ">" Specify Port
"F" Specify F Code
"P" Specify Password for F Code
":" Send push tones
Speed Dialling Input speed dial number that is programmed in the
WCP423/428
Broadcast Max: 50 stations
Transmission
Confidential Choose a destination's confidential box No. and the password
Transmission
Delayed send Program to send a document at specified time
CHAPTER 6 GENERAL
6.1 Specifications
Specifications
33.6/31.2/28.8/26.4/24.0/21.6/19.2/16.8/
14.4/12.0/9.6/7.2/4.8/2.4kbps
1
200x100dpi
200x200dpi
400x400dpi, 600x600dpi
2
)
Description