Product Outline; Produce Code; Installation Procedure - Xerox WorkCentre Pro 423 Service Manual

Hide thumbs Also See for WorkCentre Pro 423:
Table of Contents

Advertisement

WorkCentre Pro 423/428
8.20 Token Ring
8.20.1

Product Outline

Install the interface port for Token Ring
This kit is installed on the Printer equipped machine.
When installing this kit, the following kits are necessary. Prepare the kits and install
them at the beginning.
(1) Token Ring Installation Kit (Product Code: EL200079)
8.20.2

Produce Code

Token Ring: EL200043
8.20.3

Installation Procedure

1. Check the accessories. (Figure-1)
1.
Token Ring Interface Board
1) Interface Board.......1
2) User Guide .............1
2.
Token Ring Installation Kit
a. Mother PWB Assembly
b. Screw .....................2
1
(Figure-1) j0hn8099
8-48
03/02
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
FAX equipped machines: Ensure that the "Job in Memory" indicator on the control
panel goes out. Press "Job Status:Stop" button and confirm that the job has cleared
from the "Current Jobs" folder.
Printer machines: Ensure that "Ready to print or fax" is indicated on the printer
control panel.
Switch off the machine and disconnect the power cord.
3. Disconnect the Cable and remove the Screws (2). (Figure-2)
CHAPTER 8 ACCESSORIES
8.20 Token Ring
WARNING
(Figure-2) j0hn8104

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre pro 428

Table of Contents