Xerox WorkCentre Pro 423 Service Manual page 426

Item
Command to relay Choose destinations by using the group designations, or
broadcast sending memory dial, which is programmed in the broadcast station.
• Max: 50 users can be registered. Registration deletion can
Sender's
Information be done by "Fax sending tab"
Sender's name
Sender's department, address
Sender's telephone No.
Sender's fax No.
• When transmission sheet is chosen, sender's information
that is registered on the above will be reflected to the
transmission sheet.
Sender record Possible to set to print sender record whether it is programmed
in WCP423/428 or not.
• Possible to input a destination's name, a title, a comment,
Transmission
Sheet No. of pages and an attention
• Possible to select whether the same transmission sheet or
individual transmission sheet is attached to each broadcast
• Zoom (Variable R/E): 50 to 400% (1% increment)
Magnification
• Auto R/E
Other functions 2/4/8-up, Form overlay etc
SW alliance CenterWare: Document Monitor
Report Non-transmission report, Broadcast report, Relay broadcast
report
Extension/Outside Available when the extension/outside line changeover kit is
line port installed
• Able to program a list of addresses on a PC. Possible to
List of address
connect with other PC because of a separate file.
• Max: 9999 cases can be input
• Writing/reading to CSV file is possible
It allows the import of the speed dial number, programmed into
the WCP423/428 main unit, into a list of addresses via EP-
TRESS, or to store registration data in list of address into CSV
Mail notification Notify the result of registered addresses by mail
WorkCentre Pro 423/428
Description
14 characters (28 byte)
20 characters (40 byte)
15 characters (30 byte)
15 characters (30 byte)
03/02
6-9
6.1.6 Printer feature
Item
Printing method Laser Xerography
Warm-up time within 48sec (full configuration, factory default 20°C)
Printing speed DC235:23ppm(A4LEF), 12ppm(B4), 11ppm(A3)
(supplied from DC285:28ppm(A4LEF), 15.5ppm(B4), 15.5ppm(A3)
standard tray)
Resolution 23.6dot/mm (600dpi)
Smoothing function (equivalent to 2400dpi)
Paper size Tray1: A5 LEF, B5 LEF, A4 LEF, Letter LEF, Postcard LEF, Envelope
(Long type3 LEF)
Tray2-4: B5, A4, B4, A3, Letter, Legal (13", 14"), 11"x17"
MSI: Max.11"x17", Min. Postcard (B6, only LEF)
Paper supply (using Tray3/Tray4 (option), MSI(M-DD standard)
80gsm paper) 1,500sheets(500x3)/2,000sheets(500x4)(option),100sheets
(MSI:standard)
Max. paper supply 2,100sheets
(using FXA 80gsm
paper)
Paper output Standard: 500sheets
Option: Side tray: 200sheets
: Staple Finisher:500sheets+200sheets
Duplex printing (option)
Capacity of memory Standard: 32MB (Upgradable up to 96MB)
Option: additional SDRAM module (64MB)
Fonts
PCL6 81 Roman Outline Fonts
PostScript Fonts 136 Roman Fonts
(option)
PDL Standard : PCL6
Option: PostScript3
Emulation TIFF image Print
Interface Standard: Ethernet
(IEEE1284), USB*
Option: TokenRinG*
Protocol Centro: Compatible, Nibble, ECP
Ethernet: TCP/IP, NetWare, EtherTalk, SMB, DHCP, IPP, HTTP
OS Windows95/98/Me, Windows 2000, Windows NT4.0, MacOS (only for
PostScript)
*1 Only for Windows2000
*2 Ethernet doesn't operate when connected to TokenRing.
Description
(100Base-TX/10Base-T), Two-way
1
2
CHAPTER 6 GENERAL
Parallel
Contents