Xerox WorkCentre Pro 423 Service Manual page 306

WorkCentre Pro 423/428
REP 10.6.1 Reg Roller
Ref. PL PL10.6
Removal
On printer or Fax-equipped machines, ensure that
outstanding jobs have cleared before servicing or
interrupting the power to the machine as follows:.
• FAX equipped machines: Ensure that the "Job in
Memory" indicator on the control panel goes out.
Press "Job Status:Stop" button and confirm that the
job has cleared from the "Current Jobs" folder.
• Printer machines: Ensure that "Ready to print or
fax" is indicated on the printer control panel.
WARNING
Switch off the machine and disconnect the
power cord.
Procedure
1. Remove the DADF Assembly. (REP10.1.1)
2. Remove the DADF Feeder Assembly. (REP10.2.1)
3. Remove the DADF Feed Motor. (Figure-1)
1) Disconnect the connector.
2) Remove the spring.
3) Remove the screws (3).
4) Remove the DADF Feed Motor.
4-32 CHAPTER 4 DISASSEMBLY/ASSEMBLY AND ADJUSTMENT
03/02
(Figure-1) j0hn4a16
4. Disconnect the connector. (Figure-2)
1) Remove the screw.
2) Disconnect the connectors (4).
(Figure-2) j0hn4a17
4.2 Disassembly and Assembly
5. Remove the Belt. (Figure-3)
1) Remove the screws (2).
2) Remove the Motor and Bracket.
3) Remove the Belts (2).
(Figure-3) j0hn4a18
6. Remove the hute. (Figure-4)
1) Remove the screw.
2) Remove the Chute.
(Figure-4) j0hn4a19