Xerox WorkCentre Pro 423 Service Manual page 217

Chain Function Item
57 15 PSTN0 Network Service Contract
57 16 PSTN1 Network Service Contract
57 17 PSTN2 Network Service Contract
57 18 ISDN Network Service Contract
57 20 Number of redials
57 21 Interval between redials( )
57 22 Interval between redials(2)
57 23 Interval between redials(3)
57 24 Interval between redials(4)
57 25 Interval between redials(5)
57 26 Restriction of Redial Parameter Change
by User
57 30 iFAX(Internet Fax) Function
57 31 iFAX(Internet Fax) Function
57 32 iFAX(Internet Fax) Function
57 33 iFAX(Internet Fax) Function
WorkCentre Pro 423/428
Content Default
0: No Number Display/Modem Dial- 00
in
1: Number Display
2: Modem Dial-in n
0: No Number Display/Modem Dial- 00
in
1: Number Display
2: Modem Dial-in n
0: No Number Display/Modem Dial- 00
in
1: Number Display
2: Modem Dial-in n
0: No Number Display/Modem Dial- 00
in
1: Number Display
2: Modem Dial-in n
0 to 255 times(0:No redialing made) 05
(1step=1 redial)
1 to 255 min. (1step=1 min.) 01
1 to 255 min. (1step=1 min.) 01
1 to 255 min. (1step=1 min.) 01
1 to 255 min. (1step=1 min.) 01
1 to 255 min. (1step=1 min.) 01
0:Not restricted 1:Restricted 00
0: Not supported 1: Supported 00
0: Not supported 1: Supported 00
0: Not supported 1: Supported 00
0: Not supported 1: Supported 00
03/02
2-185
Description
At the auto send, when the remote terminal does not answer due to the busy
line, release the line and redial for send again. The data specifies the number
of redialings for such a case. 0 for redialing means that no redialing will be
made.
The data specifies the time between the release of line at auto send and the
first redialing. When more than 6 redialings have been set up, the data
specifies the time between the fifth and sixth redialings.
The data specifies the time between the line release at the first redialing and
the second. When more than 6 redialings have been set up, the data specifies
the time between the sixth and seventh redialings.
The data specifies the time between the line release at the second redialing
and the third. When more than 6 redialings have been set up, the data
specifies the time between the seventh and eighth redialings.
The data specifies the time between the line release at the third redialing and
the fourth. When more than 6 redialings have been set up, the data specifies
the time between the eighth and ninth redialings.
The data specifies the time between the line release at the fourth redialing and
the fifth.
How to use the Diagnostic C/E Mode
CHAPTER 2 TROUBLESHOOTING
Access
by
User
User
User
User
User
User