Xerox WorkCentre Pro 423 Service Manual page 424

6.1.4 Fax Features
1. Applicable lines
HANA CF
Public telephone line y
network (PSTN)
PBX y
Fax communication y
network (PSTN)
Fax communication -
network (ISDN)
L line (3.4kHz/2-wire type) y
ISDN network 56k/64k -
2. Compatibility (G3)
Remote Resolution
terminal Standard Fine res.
HANA CF 8x3.85 8x7.7
Louise CF 8x3.85 8x7.7
MASHU2 8x3.85 8x7.7
CF
Mashu CF 8x3.85 8x7.7
Able3200G 8x3.85 8x7.7
Able300G 8x3.85 8x7.7
Able3010 8x3.85 8x7.7
7033 8x3.85 8x7.7
7036C 8x3.85 8x7.7
7017 8x3.85 8x7.7
7021C 8x3.85 8x7.7
7036/37/38 8x3.85 8x7.7
7008 8x3.85 8x7.7
Non-FX
1) 8x3.85 1) 8x7.7
M/Cs
2) 200x100 2) 200x200
(Selected
in the order
of priority
indicated
right based
on the
capability)
WorkCentre Pro 423/428
HANA CF HANA-AP HANA-AP CF
+ISDN (option) CF +ISDN (option)
y y y
y - -
y - -
y - -
y - -
y y
Comm. Compression
Super-fine Super-fine mode method
(400dpi) (600dpi)
400x400 600x600 SG3/G4 JBIG
400x400 400x400 SG3/G4 MMR
400x400 400x400 SG3/G4 MMR
400x400 400x400 ECM/G4 MMR
400x400 400x400 ECM/G4 MMR
400x400 400x400 ECM/G4 MMR
400x400 400x400 ECM/G4 MMR
300x300 300x300 ECM MMR
12x11.55 12x11.55 ECM MMR
8x15.4 8x15.4 ECM MMR
8x7.7 8x7.7 ECM MR
12x11.55 12x11.55 G3 MR
8x15.4 8x15.4 G3 MH
1) 400x400 1) 600x600 1) SG3 1) JBIG
2) 16x15.4 2) 400x400 2) ECM 2) MMR
3) 300x300 3) 16x15.4 3) G3 3) MR
4) 8x15.4 4) 300x300 4) G4 4) MH
5) 8x15.4
3. Communication mode
0. FX Unique G4
1. ITU-T G4
2. FX Unique SG3(super G3)
3. FX Unique ECM
4. FX Unique G3
5. ITU-T SG3
6. ITU-ECM
7. ITU-G3
Ref. Priority is as numbered above.
4. Picture sizes communicated
A3W(SEF), B4W(SEF), A4W(SEF)
B5 SEF is transmitted as A4 SEF. When the machine detects A4 for A5 SE, B4 for B5 SE,
or A3 for A4 SE in slow scan direction, paper sizes of A5LEF, B5LEF or A4LEF will be
selected respectively.
5. Compression method
MH/MR/MMR/JBIG
6. Communication control
ITU-T recommendation, T.30 procedure is used for fax communication for documents.
7. Non-Standard feature
Non-Standard Feature (NSF), Non-Standard Feature Control (NSC), and Non-Standard
Feature Setup (NSS) are available.
8. Transmission speed
•
G4 (Optional): Up to 64kbps
•
G3: 33.6K, 31.2K, 28.8K, 26.4K, 24.0K, 21.6K, 19.2K, 16.8K, 14.4K, 12.0K,
9600, 7200, 4800, 2400bps (At G3 comm, auto fallback is available.)
9. Transmission time
1) Minimum transmission time
0ms/1, 5ms/1, 10ms/1, 20ms/1, 40ms/1
2) Transmission time for picture data
G3 transmission time (TP) for picture data is as shown below. (with the standard
density. Resolution is normally not changed during send operations.)
03/02
6-7
Contents
CHAPTER 6 GENERAL