Xerox WorkCentre Pro 423 Service Manual page 334

WorkCentre Pro 423/428
Term and symbol Description
When this symbol is indicated in the part
number column, a number within a circle
shows that the whole and framed areas of
the figure are the configurations after the
part was changed by the Tag number
5005
within the circle.
When this symbol is indicated in the part
number column, a number within a circle
shows that the whole and framed areas of
the figure are the configurations before
the part was changed by the Tag number
5006
within the circle.
The symbol shows the part item number
within a circle is the configuration after the
part was changed by the tag number
within the circle.
4001
The symbol shows the part item number
within a circle is the configuration before
the part was changed by the tag number
within the circle.
4002
When this is indicated in the
DESCRIPTION column, the number
[with 5V]
shows the configuration of the part is the
configuration after the part was changed.
When this is indicated in the
DESCRIPTION column, the number
[w/o 5V] shows the configuration of the part is the
configuration before the part was
changed.
5-4
03/02
CHAPTER 5 PARTS LIST
5.1 Preface