Xerox WorkCentre Pro 423 Service Manual page 231

Chain Function Item
58 102 Page split margin on outputting prints
58 103 Page combined on printing data received
58 104 Printing A3-wide received document in the
same or reduced size on Ledger paper
58 105 Selecting an tray for outputing received
document, report, and confirmation prints
58 150 Fast scan line resolution (inch)
58 151 Fast scan line resolution (mm)
58 152 Slow scan line resolution (inch)
58 153 Slow scan line resolution (mm)
58 160 Memory threshold to reject documents
received
58 161 Memory threshold to shift to real time
receive
WorkCentre Pro 423/428
Description Default
0mm to 127mm (1step=1mm) 16
0:No combined 1:Combined 00
0: Print an A3-wide received 00
document in the same size(100%)
on Ledger paper by deleting both
ends from the image information
1: Print an A3-wide received
document on Ledger paper by
reducing into 93.9% (279/297).
0:Face down tray output 1:Face up 00
tray output
0:Disable reception 1: Enable 116(007
reception bit2:200ppi bit4:300ppi 4)
bit5:400ppi bit6:600ppi
0:Disable reception 1: Enable 52(0034
reception bit2:8dot/mm )
bit4:12dot/mm bit5:16dot/mm
0:Disable reception 1: Enable 118(007
reception bit1:100ppi bit2:200ppi 6)
bit4:300ppi bit5:400ppi bit6:600ppi
0:Disable reception 1: Enable 54(0036
reception bit1:3.85line/mm )
bit2:7.7line bit4:11.55line/mm
bit5:15.4line/mm
0 to 100% (1step=1%) 100%=All is 00
rejected
0 to 99% (1step=1%) 20
03/02
2-199
Description
When the data overflew out of the standard size by specifying the page
margin for receive operation, a process in Chain=058 and Function=101
(100% or auto reduced for the data received) will be enabled. This data
specifies the page margin amount.
In the identical jobs of receive operation, this data determines whether or
not to enable the feature that two pages of same standard size data will
be reduced for output in a page of print (2in1).
Specifies outputting documents/report and copies separately in the Side
Tray Kit (Face Up Tray) installed machines.
Specifies the fast scan line resolution by the inch. Do not change the
data unless otherwise instructed.
Specifies the fast scan line resolution by the mm. Do not change the
data unless otherwise instructed.
Specifies the slow scan line resolution by the inch. Do not change the
data unless otherwise instructed.
Specifies the slow scan line resolution by the mm. Do not change the
data unless otherwise instructed.
Specifies the remaining memory capacity that is capable of handling
image data rreceived. The customers who want to use this machine
only for sending operation, should set the data to 100%.
When the remaining memory capacity available for processing the
communication image data becomes low, Main unit moves to the
realtime receive operation that receives data continuously while printing
the data received. This data specifies the threshold of remaining memory
capacity available to move to the real time receive mode. As the setup
value is greater, it is easier to move to the real time receive mode.
However, the IOT will be used more frequently and it will be harder to
use the dual access feature that uses IOT.
How to use the Diagnostic C/E Mode
CHAPTER 2 TROUBLESHOOTING
Access by
User
User
User
CE
CE
CE
CE
CE
CE