Xerox WorkCentre Pro 423 Service Manual page 520

13. Install the Cable. (Figure-3)
Electric parts may be damaged by static electricity. Be sure to wear a wrist strap when handling
electric parts. If no wrist strap is available, touch a metal section before work to eliminate static
electricity as far as possible.
1) Connect the Connector.
2) Secure it with the Clamps (2).
14. Install the ESS Box. (Figure-4)
1) Install the ESS Box.
2) Tighten the screws (4).
WorkCentre Pro 423/428
CAUTION
(Figure-3) j0hn8055
03/02
8-43
(Figure-4) j0hn8056
8.18 Printer Kit
CHAPTER 8 ACCESSORIES