Xerox WorkCentre Pro 423 Service Manual page 229

Chain Function Item
57 830 G4 Trace Mode
57 831 G4 Trace Layer
57 832 G4 Trace Channel
WorkCentre Pro 423/428
Content Default
0:Overwrite 1:Buffer full 00
2:Mixed
2:Data link 3:Network 05
4:Transport 5:Session
6:Presentation 8:Between CPUs
0:All channels 1:Specific channel 01
03/02
2-197
Description
Specifies the method of receiving/storing the protocol tracing obtained into
memory in the G4 communication. "Overwrite" is a FIFO method for the
signal, "Buffer Full" is to fill the memory with signal, and "Mixed" is the
combination of data received immediately before and after the trace.
In the G4 communication, this data specifies the protocol tracing layer for
obtaining. It is necessary to specify the layer before activating communication
for obtaining the protocol.
In the G4 communication, this data specifies the channel for the protocol
tracing for obtaining. When "All channels" is selected, it is necessary to
understand the usage before changing data as the trace storage capacity for a
channel will be reduced.
How to use the Diagnostic C/E Mode
CHAPTER 2 TROUBLESHOOTING
Access
by
CE
CE
CE