Xerox WorkCentre Pro 423 Service Manual page 292

WorkCentre Pro 423/428
6. Fuser
REP 6.1.1 Fuser Assembly
Ref. PL: PL6.1
Removal
On printer or Fax-equipped machines, ensure that
outstanding jobs have cleared before servicing or
interrupting the power to the machine as follows:.
• FAX equipped machines: Ensure that the "Job in
Memory" indicator on the control panel goes out.
Press "Job Status:Stop" button and confirm that the
job has cleared from the "Current Jobs" folder.
• Printer machines: Ensure that "Ready to print or
fax" is indicated on the printer control panel.
WARNING
Switch off the machine and disconnect the
power cord.
WARNING
After switching off the machine the fuser
surfaces are still hot. Allow to cool, or avoid
contact while working near the fuser.
Procedure
1. Pull out the R/H Unit.
2. Remove the Fuser Assembly. (Figure-1)
1) Release the Handle.
2) Remove the Fuser Assembly in the arrow
direction.
4-18 CHAPTER 4 DISASSEMBLY/ASSEMBLY AND ADJUSTMENT
03/02
(Figure-1) j0hn4606
Installation
Procedure
1. Perform the removal steps in reverse order.
4.2 Disassembly and Assembly
REP 6.2.1 Pressure Roll
Ref. PL: PL6.2
Removal
On printer or Fax-equipped machines, ensure that
outstanding jobs have cleared before servicing or
interrupting the power to the machine as follows:.
• FAX equipped machines: Ensure that the "Job in
Memory" indicator on the control panel goes out.
Press "Job Status:Stop" button and confirm that the
job has cleared from the "Current Jobs" folder.
• Printer machines: Ensure that "Ready to print or
fax" is indicated on the printer control panel.
WARNING
Switch off the machine and disconnect the
power cord.
WARNING
After switching off the machine the fuser
surfaces are still hot. Allow to cool, or avoid
contact while working near the fuser.
Procedure
1. Pull out the R/H Unit.
2. Release the Handle toward front and lift up the
Fuser Assembly. (REP6.1.1)
3. Remove the Decurler Chute Assembly. (Figure-1)
1) Remove the screw.
2) Remove the Inlet Chute.
3) Remove the screws (4).
4) Remove the Decurler Chute Assembly.