Xerox WorkCentre Pro 423 Service Manual page 235

Chain Function Item
58 370 Selecting Append Data for event tracing
58 371 Controlling trace buffer overwrite
58 372 Selecting trace mode from procedure
trace, interface trace, auxiliary information
trace, and event trace
58 501 Time display
58 502 Display order of Year, Month, Date, Hour,
and Minute
58 503 Time indication (hour)
58 504 Time indication (min)
58 505 Switching display and language to print
58 510 Combined send capability
58 511 Relay broadcast selection capability
58 512 Mail Box selection capability
58 513 Remote service. Receiving service from
TRESS master through line
58 551 Manual receive button during
communication
58 552 Timer value for auto start when
abbreviated dialling or quick dialling
(including group or wild card " * ") is
specified
WorkCentre Pro 423/428
Description Default
0X00:Event code only 0X01:Event 00
code and *prm
0X00:overwrite 0X01:until full 00
bit0: procedure trace bit1: 05
interface trace bit2: auxiliary
information trace bit3:event trace
0X00 to 0X0F
0: 12 hr display 1:24 hr display 00
0:YY_MM_DD 1:MM_DD_YY 00
2:DD_MM_YY
0 to 0X23(0 to 23 hour) 21
0 to 0X59(0 to 59 min) 00
0: 1 letter 2 byte 1:1 letter 1 byte 00
0:Off 1:On 01
0:Off 1:On 01
0:Off 1:On 01
0:Disabled 1:Enabled 01
0:Manual receive 1:Manual poll 00
0 to 59 sec. 06
03/02
2-203
Description
Determines 12 hour or 24 hour for displaying the time stored
Selects Japanese, American, or British method for the order of printing
date on Reports or Lists.
Specifies how "Hour" should be indicated for a delayed send operation
when it is initially set up on the Control Panel.
Specifies how "Minute" should be indicated for a delayed send operation
when it is initially set up on the Control Panel.
To be able to switch the language on display or printed when we support
the second language in the future.
Determines whether or not to have the combined send feature
functioned (When a job to the same address is waiting for transmission,
send the job combined with the current send job handling it as the
subsequent page)
A delayed job with the time specified, a job waiting for redialing, of the
broadcast/relay broadcast selected, of mail Box, of Relay Send, of
Immediate send, Memory capacity insufficient, Speed dial used with the
keypad, or of the different department number (Operator Card
management Kit installed) is not applicable to this feature.
Jobs sent combined will be separately printed on the Activity report as
an individual job (the time sent will be administered at the end of each
page)
Determines whether or not to have the Relay broadcast selection
capability functioned.
Determines whether or not to have the Mail Box selection capability
functioned.
This data is used to enable or disable the remote service capability. If
"Disable" is selected, EP-TRESS releases the line when a reception
response signal is detected.
Determines that the Manual Receive button in the Telephone mode
should be functioned as Manual Receive or Manual Poll
How to use the Diagnostic C/E Mode
CHAPTER 2 TROUBLESHOOTING
Access by
User
User
User
User
User
User
User
CE
CE