Electronic Sort Kit; Product Outline; Product Code; Installation Procedure - Xerox WorkCentre Pro 423 Service Manual

WorkCentre Pro 423/428

8.3 Electronic Sort Kit

8.3.1

Product Outline

This kit enables the electronic sort function.
8.3.2

Product Code

Electronic Sort Kit: EL200127
8.3.3

Installation Procedure

Switch off the machine and disconnect the power cord.
1. Check the accessories. (Figure-1)
1) HDD Assembly............... 1
2) HDC PWB..................... 1
3) Spacer......................... 2
4) Core............................ 2
5) Screw.......................... 6
6) Wire Harness................ 1
7) Flat Cable..................... 1
2. Remove the Screws (3) and the Rear Cover.
3. Remove the Screws (7) and the Electrical Cover.
4. Install the HDD Assembly. (Figure-2)
WARNING
(Figure-1) j0hn8006
8-6
03/02
Electric parts may be damaged by static electricity. Be sure to wear a wrist strap when handling
electric parts. If no wrist strap is available, touch a metal section before work to eliminate static
electricity as far as possible.
1) Install the HDD Assembly.
2) Tighten the screws (4).
5. Install the HDC PWB. (Figure-3)
1) Install the Spacers (2).
2) Install the HDC PWB.
3) Tighten the screws (2).
CHAPTER 8 ACCESSORIES
8.3 Electronic Sort Kit
CAUTION
(Figure-2) j0hn8007