Xerox WorkCentre Pro 423 Service Manual page 521

WorkCentre Pro 423/428
15. Connect the Connector. (Figure-5)
1) Secure the Control Panel Wire Harness with the Clamps (3).
2) Connect the Connector.
(Figure-5) j0hn8057
16. Remove the ROM Cover. (Figure-6)
1) Loosen the screws (4).
2) Remove the ROM Cover.
(Figure-6) j0hn8058
17. Connect the Connector (2). (Figure-7)
1) Connect the Connector (2).
8-44
03/02
18. Remove the Blind Cover from the Top Cover and install the Control Panel. (Figure-8)
1) Remove the Blind Cover.
2) Install the Control Panel.
CHAPTER 8 ACCESSORIES
8.18 Printer Kit
(Figure-7) j0hn8059
(Figure-8) j0hn8060