Xerox WorkCentre Pro 423 Service Manual page 488

8.5 MSI Kit
8.5.1
Product Code
MSI Kit: EL200123(FX)
: EL200204 (DMO-E)
8.5.2
Installation Procedure
1. Check the accessories. (Figure-1)
1) MSI Assembly................ 1
2) Rear Cover.................... 1
3) Damper........................ 1
4) Screw(silver).................. 1
5) Screw(black).................. 2
6) Tapping Screw................ 1
2. Turn the main unit power off.
On printer or Fax-equipped machines, ensure that outstanding jobs have cleared
before servicing or interrupting the power to the machine as follows:.
•
FAX equipped machines: Ensure that the "Job in Memory" indicator on the control
panel goes out. Press "Job Status:Stop" button and confirm that the job has cleared
from the "Current Jobs" folder.
•
Printer machines: Ensure that "Ready to print or fax" is indicated on the printer
control panel.
Switch off the machine and disconnect the power cord.
3. Remove the Blind Cover. (Figure-2)
1) Remove the screws (2).
2) Remove the Blind Cover.
WorkCentre Pro 423/428
(Figure-1) j0hn8014
WARNING
4. Using the screws (2) removed in step 3, secure the OCT Cover.
5. Install the MSI Assembly. (Figure-3)
1) Install the MSI Assembly.
2) Tighten the Tapping Screw.
3) Tighten the Screws (black)(2).
6. Connect the Connectors (3) and install the Damper. (Figure-4)
1) Connect the Connectors (3).
2) Install the Damper.
03/02
8-11
(Figure-2) j0hn8015
(Figure-3) j0hn8016
8.5 MSI Kit
CHAPTER 8 ACCESSORIES