Xerox WorkCentre Pro 423 Service Manual page 527

WorkCentre Pro 423/428
6. Insert the Interface Board and secure it. (Figure-5)
1) Insert the Interface Board.
2) Tighten the Screws (2).
(Figure-5) j0hn8102
7. Return the machine to its original state.
8. Connect the Interface Cable.
9. Connect the power cord and turn on the power.
8-50
03/02
10. If necessary, change the setting on the Printer UI. (Figure-6)*
11. Store the Slot Cover removed in Step 4.
CHAPTER 8 ACCESSORIES
8.20 Token Ring
(Figure-6) j0hn8103