[Cm74] Stored Number For Station Speed Dialing - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
74
FUNCTION:
This command is used to enter the stored number for Station Speed Dialing feature into the memory al-
located with CM73.
PRECAUTION:
(1) Data can only be changed when the access code is displayed. Enter the data in the following order;
the new access code, comma, the called number, and
and .
EXE
(2) When entering data with characters, the following characters can be registered;
Alphabet upper case (A-Z), alphabet lower case (a-z), numeric (0-9), symbol (! " # $ % & ' ( ) + ,
; < = > ? @ [ ] ^ _ ' { } ~), Space, hyphen (-), period (.), slash (/), colon (:)
NOTE:
The character "CCC" cannot be registered.
ASSIGNMENT PROCEDURE:
ST + 74Y + DE +
ST + 745 + DE +
STORED NUMBER FOR STATION SPEED DIALING
MEMORY SLOT NUMBER
(5 digits)
STORED NUMBER
(4 digits/1-8 digits)
. For clearing the data, enter "CCC"
EXE
STORED NUMBER
+ DE +
(Maximum 32 digits)
MEMORY SLOT NUMBER
+ DE +
(5 digits)
3-479
CM74
+ EXE
+ EXE
NWA-033623-001 Rev.8.1
91ch3005.fm