NEC UNIVERGE SV8300 Command Manual page 581

COMMAND CODE TITLE:
8A
Y
No. MEANING
5000 LCR Pattern No. 000
5255 LCR Pattern No. 255
LCR DEVELOPMENT TABLE
1ST DATA
DATA
177 Sharing LCR Pattern No.
with alternative routing
178 Designation of Digit
Addition Pattern No.
(
180 Origination of a call by
pressing "#" key
181 Whether to provide Data
Conference/Instant Mes-
sage for each LCR pat-
tern
[8300R4]
NOTE:
183 Calling Name Notifica-
tion setting for SIP trunk
[8300R4]
NOTE:
MEANING DATA
9000
See CM8A
Y=5000-5255) 9255
NONE
Set this data to "0" for the opposite office other than
SV8300 when using 8300R4 software.
When this data is set to "0" but the name is not assigned by
CM77 Y=0/1, the calling number is notified. The procedure
of calling number notification follows the existing calling
number notification service.
3-525
2ND DATA
MEANING
0 To provide
(As per CM8A Y=5000-
5255>178)
1 Not provided
(As per CM8A Y=5000-
5255>100)
Digit Addition Pattern No.
000
Digit Addition Pattern No.
255
No digit addition
0 To provide
1 Not provided
0 Restricted
1 Allowed
00 Notify the name assigned
for each station (Notify the
name registered by CM77
Y=0, 1)
15 Not provide calling name
notification
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM8A
: Default
91ch3005.fm