NEC UNIVERGE SV8300 Command Manual page 716

COMMAND CODE TITLE:
E8
Y
No. MEANING
3 VoIPDB Firmware
download
[8300R7]
NOTE 1: This data is effective online.
NOTE 2:
When "01" as the necessity of download the VoIPDB firmware is displayed on LCD, assign the type of
VoIPDB (42/44) displayed on LCD and download the VoIPDB firmware.
NOTE 3: When "02" as the necessity of download the VoIPDB firmware is displayed on LCD, assign the type of
VoIPDB (42/44) displayed on LCD and download the VoIPDB firmware after update of the basic soft-
ware.
NOTE 4:
When VoIPDB is not accommodated, or PZ-64IPLA/PZ-128IPLA is accommodated, or PZ-64IPLC-A/
PZ-128IPLC-A is offline, "HARDWARE ERROR" is displayed on LCD by reading out the VoIPDB firm-
ware.
NOTE 5: During updating VoIPDB firmware, "WAIT, BUSY NOW" is displayed on LCD, and the cycle of the
"S2" LED on the CPU blade becomes special cycle (ON: OFF=1: 1).
NOTE 6:
By CAT or PCPro connected to Unit No. 01, VoIPDB firmware of all units can be downloaded.
By PCPro connected to Unit No. 02-50, VoIPDB firmware cannot be downloaded, and then "CM CODE
NOT ALLOWED" is displayed on LCD.
NOTE 7: After the VoIPDB firmware update is completed, VoIPDB is reset automatically, and activated the up-
dated VoIPDB firmware.
UPDATING OF ACCESS BLADE FIRMWARE
1ST DATA
DATA MEANING
10 XX XX: Unit number
(01-50)
1101 Stand by CPU
2ND DATA
DATA
XX ZZ Readout data of firmware
when operating
XX: Type of VoIPDB
42: PZ-64IPLC-A
44: PZ-128IPLC-A
ZZ : Necessity of download
VoIPDB Firmware
00: Not necessary
01: Necessary
02: Necessary to down-
XX Input data when executing
download
XX: Type of VoIPDB
42: PZ-64IPLC-A
44: PZ-128IPLC-A
3-660
RELATED
COMMAND
MEANING
load the basic soft-
ware and VoIPDB
Firmware
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CME8
91ch3008.fm