[Cmb4] Peg Count Of Ip Network - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
B4
FUNCTION:
This command allows accumulated traffic data for Bandwidth Control between location groups on IP
network to be read from the system PEG counter. Data can be cleared after reading.
PRECAUTION:
When the system is reset, the contents in the memories of the PEG counter are all cleared.
ASSIGNMENT PROCEDURE:
• To display
B4YY
ST + + DE
• To clear individual data
B4YY
ST + + DE
• To clear all data
+ + DE
ST B4YY
PEG COUNT OF IP NETWORK
LOCATION NUMBER (00-63)
+
+
LOCATION NUMBER (00-63)
LOCATION NUMBER (00-63)
+
+
LOCATION NUMBER (00-63)
+ + DE +
9999 CCC
+ DE
+
+ DE
CCC
+
EXE
3-609
+
EXE
NWA-033623-001 Rev.8.1
JUNE/15/2011
CMB4
91ch3007.fm