Chapter 2 Precaution; Conditions For Using Commands - NEC UNIVERGE SV8300 Command Manual

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

Some commands require a system reset after data setting, and others cannot be assigned/changed

unless the system is in off-line mode (a state in which call processing is at a halt).

These commands are shown in the following table, categorized according to the conditions for their

When deleting data in any command, enter "CCC" as the 2nd data. However, data in the following

commands cannot be deleted.

• Commands where the default ( ) is provided but the default ( ) is "NONE".

• CM29, CM41, CM42, CM60 Y=30.

CONDITIONS FOR USING COMMANDS

Chapter 2 PRECAUTION

NWA-033623-001 Rev.8.1