[Cmaa] Dti/Brt/Prt/Cct Blade Functions - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
AA
FUNCTION:
This command is used to assign the functions to the DTI, BRT, PRT, and CCT blade.
PRECAUTION:
After setting CMAA Y=00-02, 06, 09, 19-21, 25, the blade reset is required.
ASSIGNMENT PROCEDURE:
AAYY
ST + + DE
DATA TABLE:
Y
No. MEANING
00 Data Mode for DTI (T1 1.5 Mbps)/
CCT (T1 1.5 Mbps)
01 Frame Configuration for DTI (T1
1.5 Mbps)/CCT (T1 1.5 Mbps)
Frame Configuration for DTI (E1
2 Mbps)
[8300R3]
02 ZCS (Zero Code Suppression) for
CCT (T1 1.5 Mbps)
NOTE: This data is effective only when the second data of CMAA Y=01 is set to 0 (12-Multi Frame).
DTI/BRT/PRT/CCT BLADE FUNCTIONS
TRUNK BLADE NUMBER
+
(000-127)
DATA
BLADE RESET
BLADE RESET
BLADE RESET
BLADE RESET
DATA
+ DE +
(1-2 digits)
SETTING DATA
MEANING
0 Based on AT&T Specifications
1 Not Used
0 12-Multi Frame (D4)
1 24-Multi Frame (ESF)
0 Double Frame (no CRC-4)
1 CRC-4 multiframe structure
0 Available (Non Transparent)
1 Not available (Transparent)
3-581
CMAA
+ EXE
: Default
RELATED
COMMAND
CM05 Y=1
CM05 Y=1
CM05 Y=1
Continued on next page
NWA-033623-001 Rev.8.1
91ch3007.fm
JUNE/15/2011