[Cm73] Memory Allocation For Station Speed Dialing - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
73
FUNCTION:
This command is used to allocate memory areas for Station Speed Dialing to individual stations.
PRECAUTION:
The allowed number of 10-Slot Memory Blocks per station number ranges from 1 to 10.
ASSIGNMENT PROCEDURE:
ST + 73 + DE +
DATA TABLE:
STATION NUMBER
X Station number
which performs Sta-
XXXXXXXX tion Speed Dialing
NOTE 1:
If one of the 1000-Slot Memory Blocks is used for Station Speed Dialing (indicated with
CM08>110, 111, 112, or 176) and MultiLine Terminal one-touch memory (indicated with
CM94), it cannot also be used for Station Speed Dialing.
MEMORY ALLOCATION FOR STATION SPEED DIALING
STATION NUMBER
+
(1-8 digits)
WW XX Y ZZ
NONE
DATA
DE + + EXE
(7 digits)
SETTING DATA
WW: 1000-Slot Memory Block number (00-19)
XX : 10-Slot Memory Start Block number (00-99)
Y : Facility for programming the dialed number from the
station (0/1=Allowed/Not allowed)
ZZ : Number of 10-Slot Memory Blocks (01-10)
No data
3-475
CM73
: Default
NOTE 1, NOTE 2
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/14/2011