[Cm44] External Relay Starting Conditions - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
44
FUNCTION:
This command is used to assign the relay circuit number and Relay Group number of PGD(2)-U10 ADP/
External Relay Interface of CPU blade used for controlling external relay.
PRECAUTION:
(1) For External Relay Interface of the CPU blade, assign 312, 313 (blade No. 31, circuit No. 2, 3).
ASSIGNMENT PROCEDURE:
ST + 44YY + DE
DATA
+ EXE
(1-8 digits)
DATA TABLE:
Y
No. MEANING
00 Setting of the external
relay starting conditions
NOTE: To use the dual port mode on PGD (2)-U10 station (CH1/2), different circuit numbers must be assigned
to each port.
01 Association of the
Relay Group number
and PGD (2)-U10
station number
NOTE: Set this command only for a PGD (2)-U10 station (CH1) when using a PGD (2)-U10 station (CH2).
EXTERNAL RELAY STARTING CONDITIONS
RELAY CIRCUIT
+ GROUP NUMBER
+
NUMBER (3 digits)
RELAY CIRCUIT No./
RELEY GROUP No.
DATA
XX Y XX
Y
312, 313: External Relay
00 Relay Group Number
31
RELAY
GROUP
+ DE
/
NUMBER
(2 digits)
MEANING DATA
: Relay Group See "Data 1 and Data 2" on the next page
Number (00-31)
: Circuit Number
(0-3)
Interface of
CPU blade
XXXXXXXX
NONE
3-384
DATA 1 DATA 2
+ (4 digits) +
(2 digits)
SETTING DATA
MEANING
X PGD (2)- U10 station num-
ber
X: 0-9, A (*), B (#)
No data
Continued on next page
NWA-033623-001 Rev.8.1
NOVEMBER/12/2008
CM44
/
: Default
91ch3004.fm