[Cmf6] Online Mp-Fp Command Output - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
F6
FUNCTION:
This command is used only for maintenance.
DO NOT USE this command without the assistance of a NEC engineer.
ASSIGNMENT PROCEDURE:
ST + F6Y + DE
DATA TABLE:
Y
No. MEANING
2 MP-FP command out-
put setting
ONLINE MP-FP COMMAND OUTPUT
1ST DATA
+ + DE +
(2 digits)
1ST DATA
DATA
00 Command Code
01 Unit Number
02 Slot number
03 IN/OUT command setting
2ND DATA
+ EXE
(1-8 digits)
MEANING DATA
NONE
NONE
XXX
NONE
CCC
3-699
2ND DATA
MEANING
00 Command code to be output
FE
Output all command codes
000 Unit number to be output
(When unit number '01' is
049 specified, '000' is selected.)
Output all Unit numbers
Slot number to be output
(When slot number '01' is
specified, '000' is selected.)
000-017: TDM terminal
024-026: SIP trunk
032-047: IPT (P2P CCIS)
128-191: IP Station
Output all Slot numbers
0 Display both IN command/
OUT command
1 Display only OUT command
2 Display only IN command
3 Not displayed
Clear all the data of CMF6
Y=2
NWA-033623-001 Rev.8.1
CMF6
: Default
91ch3008.fm
JULY/17/2009