NEC UNIVERGE SV8300 Command Manual page 670

COMMAND CODE TITLE:
BA
Y
No. MEANING
22 Payload size for SIP
trunk
NOTE 1:
This data is not available when CMBA Y=21 is set to default data.
NOTE 2: Because the standard payload size for SIP is 20 ms., it is strongly recommended to set the second
data to "0".
25 Query a DNS server to
get the IP Address
NOTE 1: When the second data is set to "0", only the IP Address replied from to a DNS server is used. When
the second data is set to "1", the SIP server IP Address assigned by CMBA Y=30 is used.
NOTE 2: Set the second data to "1" for Point-to-Multipoint connection (when CMA7 Y=46 is set to "0").
NOTE 3: When DNS resolver is used, set the second data to "0".
27 Whether to provide
Session Refreshment
when 18X: provisional
response is received
again
[North America
Only]
[8300R4]
NOTE: Set the second data to "1" for Point-to-Multipoint connection (when CMA7 Y=46 is set to "0").
29 Session Timer
refresher kind
NOTE:
Set the second data to "1" for Point-to-Multipoint connection (when CMA7 Y=46 is set to "0").
SIP PROFILE DATA
1ST DATA
DATA MEANING
00 Profile number
for control
31 packet
RESET
00 Profile number
for control
31 packet
RESET
00 Profile number
for control
31 packet
RESET
00 Profile number
for control
31 packet
RESET
2ND DATA
DATA
1 20 ms.
2 30 ms.
3 40 ms.
0 Provide
1 Not provided
0 To provide
1 Not provided
0 uas
1 uac
3-614
RELATED
COMMAND
MEANING
CM8A
Y=5XXX:
179
CMA7 Y=71
CMA7 Y=71
CMBA Y=30
CMA7 Y=71
CMA7 Y=71
CMBA Y=56,
83, 88
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/14/2011
CMBA
: Default
91ch3007.fm