NEC UNIVERGE SV8300 Command Manual page 201

COMMAND CODE TITLE:
10
Y
No. MEANING
03 SIP trunk registration
RESET
STATION NUMBER, TRUNK NUMBER, BLADE NUMBER
1ST DATA
DATA MEANING
01XXX Virtual Port num-
ber (for SIP trunk)
XXX: 000 (Port No.
for control
channel)
: 001-096
(Port No. for
voice chan-
nel)
[8300R3 or
before]
XXX: 000 (Port No.
for control
channel)
: 001-015
(Port No. for
control/voice
channel)
: 016-127
(Port No. for
voice chan-
nel)
[8300R4 or later]
NOTE 1:
SIP trunk can be accommodated only for the Main Unit (Unit01).
NOTE 2: Set one virtual port number for control channel between 000 and 015 for each
carrier.
NOTE 3: Virtual port number 001-015 for control/voice channel can be used for voice
channel when they are not used for control channel. One virtual port number
cannot be used both control channel and voice channel at the same time.
NOTE 4: Up to 96 virtual port numbers can be set for voice channel.
NOTE 5:
License for SIP trunk channel is consumed sequentially from the lowest trunk
number.
NOTE 6: For virtual port number for voice channel, trunk route is allocated by CM30
Y=00 for each carrier.
2ND DATA
DATA
D000 Trunk No.
D511
NONE No data
3-145
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.8.1
CM10
: Default
91ch3002.fm
APRIL/16/2010