NEC UNIVERGE SV8300 Command Manual page 504

COMMAND CODE TITLE:
65
Y
No. MEANING
26 Number Display when
calling from Sub Line via
CCIS/ Number Display
through CCIS for SMDR
NOTE: When setting Name Display to sub line, whether to display My Line number/name or sub line num-
ber/name depends on CM08>502. Set this data to the same setting of CM08>502.
(ex.) When CM65 Y=26 is set to "0" (My Line number/name), set CM08>502 to "0"(Name of My
27 ACD (Automatic Call
Distribution)
28 RR sending priority when
receiving OAI SCF
29 Day/Night Mode
30 VMS Password Privacy
34 Calling Party number
sent to MCI when access-
ing VMS from a sub line
assigned on Multiline
Terminal
36 Trunk Restriction Class
change according to the
schedule of Day/Night
Mode Change by System
Clock
SERVICES ON TENANT BASIS
TENANT
00-63
Line).
00-63
SETTING DATA
DATA MEANING
0 My Line number/name
1 Sub Line number/name
0 ACD
1 Not ACD
0 Send RR signal after
SMFN
1 Send RR signal before
SMFN
0 Two kinds of mode
(Day Mode, Night Mode)
1 Four kinds of mode
(Day Mode, Night Mode,
Mode A, Mode B)
0 Allowed
1 Not allowed
0 Sub Line number
1 My Line number
0 Provide
(Day Mode/Night Mode
only)
1 Not provided
3-448
CM65
: Default
RELATED
COMMAND
CM08>502
CM13 Y=10
CM4A
CM65 Y=29
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JUNE/15/2011