NEC UNIVERGE SV8300 Command Manual page 139

COMMAND CODE TITLE:
08
BASIC SERVICE: 1200-1210
1200 Send ANI signal to PSTN on DOD MFC call
[8300R3.5]
NOTE: For Brazil, set this command to "0".
1201 Sender Tone sending on DOD MFC call
[8300R3.5]
1202 Selection of reference to Caller ID when an incoming call is
received to SIP trunk and "anonymous" is set to From header
Displayname field or Username field
[8300R4]
1203 Selection of ringing cadence when calling from trunk to CCIS
tandem office
[8300R5]
NOTE: Set CM08>138 to "0" and CM08>1203 to "0" for CCIS tandem office when the ringing signal from
trunk and via CCIS tandem office are the same.
1205 Selection of trunk route seized for Mobility Access
[8300R3]
1209 Ringing cadence on incoming CCIS call by CM35 Y=033 and
034
[8300R6]
1210 Access Code to be added to the calling party number when
incoming call from C.O. (This assignment is required to call
back from the analog telephone for Caller ID-Station)
[8300R6]
BASIC SERVICES
BASIC SERVICE
0 To send
1 Not sent
0 Not sent
1 To send
0 As per CMBA Y=126
1 Caller ID is not informed
0 As per CM35 Y=000
1 As per CM35 Y=033
0 By calling party's tenant/terminating
trunk's tenant
1 By Mobility Access station's tenant
0 To provide
1 Not provided
0 To provide
1 Not provided
3-83
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JUNE/15/2011
CM08